Category

IPS-HS1 Controller

TECHNICAL PARAMETERS Model IPS-HS1 For Motor Qty 1-4 PCS Input Voltage DC24-32V Working Temperature -20℃~+40℃ Output Voltage DC24V Storage Temperature -20℃~+90℃ Power 320W Max 10A Working Humidity 20%-90% Receiver Rs485/RF433/IO Other Functions Location memory and display Controller Type Hall 6-Wire Control Key Mode Press Continuous Optional Functions 2.5 meter spring...
Model
-
+
$10.00

DIHOOL

100 In Stock

TECHNICAL PARAMETERS

Model IPS-HS1 For Motor Qty 1-4 PCS
Input Voltage DC24-32V Working Temperature -20℃~+40℃
Output Voltage DC24V Storage Temperature -20℃~+90℃
Power 320W Max 10A Working Humidity 20%-90%
Receiver Rs485/RF433/IO Other Functions Location memory and display
Controller Type Hall 6-Wire Control Key Mode Press Continuous
Optional Functions 2.5 meter spring wire manual controller / Sensor Switch / PLC

Note: You need to consult us before you can modify the controller. Please do not modify randomly, it will cause the electric actuator damage. You Need to record every value (n01-n 12) before modification
1. Press the'S, 1, 2, 3'buttons in sequence to enter the settings
2. RST malfunction occurs, please press the 'V' button to reset
3. To use sensor control, please press'S, 3, 2, 1'to enter the settings
4. After setting the parameters, please press 'S' for 3 seconds to save

DIMENSIONS

WIRING INSTRUCTION

WIRING INSTRUCTION

Error code'rst'.
Please press the'V'key, and it cannot be released. The motor drops to the bottom and rebounds again. The screen will display'O', release the V key.
Reset successfully