IPS-HS1 Controller
TECHNICAL PARAMETERS
Model | IPS-HS1 | For Motor Qty | 1-4 PCS |
Input Voltage | DC24-32V | Working Temperature | -20℃~+40℃ |
Output Voltage | DC24V | Storage Temperature | -20℃~+90℃ |
Power | 320W Max 10A | Working Humidity | 20%-90% |
Receiver | Rs485/RF433/IO | Other Functions | Location memory and display |
Controller Type | Hall 6-Wire Control | Key Mode | Press Continuous |
Optional Functions | 2.5 meter spring wire manual controller / Sensor Switch / PLC |
Note: You need to consult us before you can modify the controller. Please do not modify randomly, it will cause the electric actuator damage. You Need to record every value (n01-n 12) before modification
1. Press the'S, 1, 2, 3'buttons in sequence to enter the settings
2. RST malfunction occurs, please press the 'V' button to reset
3. To use sensor control, please press'S, 3, 2, 1'to enter the settings
4. After setting the parameters, please press 'S' for 3 seconds to save
DIMENSIONS
WIRING INSTRUCTION
WIRING INSTRUCTION
Error code'rst'.
Please press the'V'key, and it cannot be released. The motor drops to the bottom and rebounds again. The screen will display'O', release the V key.
Reset successfully